TALK=T;RUN(1,1)
  DISPLAY
  This case provides a test of the Lam-Bremhorst low-Reynolds number
  k-e model for 2d steady developing flow in a channel. As a test of
  symmetry both halves of the channel are considered in the y-z
  plane. In addition the temperature equation is solved via the H1
  variable with a uniformly- distributed heat flux applied to the
  fluid at each wall. The correct representation of blockages via
  "porosities" is tested by inserting a solid region on either side
  of the channel. The results of this calculation may be compared
  calculations of the same case without blockages and also with
  blockages represented by the "conjugate-heat-transfer" facility.
  A relatively coarse grid is used so as to permit convergence in
  about 400 sweeps. The problem has been set up to perform 30
  sweeps only, so as to reduce execution times in performing
  routine testing procedures.
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(LAM-BRE_2D Y-Z POROS CHANNEL TEST  :T216)
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 1
 XULAST =1.
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 34
 YVLAST =1.
 YFRAC(1)=0.025 ;YFRAC(2)=0.05
 YFRAC(3)=0.075 ;YFRAC(4)=0.1
 YFRAC(5)=0.100023 ;YFRAC(6)=0.100063
 YFRAC(7)=0.100137 ;YFRAC(8)=0.100269
 YFRAC(9)=0.100507 ;YFRAC(10)=0.100935
 YFRAC(11)=0.101705 ;YFRAC(12)=0.103092
 YFRAC(13)=0.105588 ;YFRAC(14)=0.11008
 YFRAC(15)=0.118167 ;YFRAC(16)=0.132724
 YFRAC(17)=0.15 ;YFRAC(18)=0.167276
 YFRAC(19)=0.181833 ;YFRAC(20)=0.18992
 YFRAC(21)=0.194412 ;YFRAC(22)=0.196908
 YFRAC(23)=0.198295 ;YFRAC(24)=0.199065
 YFRAC(25)=0.199493 ;YFRAC(26)=0.199731
 YFRAC(27)=0.199863 ;YFRAC(28)=0.199937
 YFRAC(29)=0.199977 ;YFRAC(30)=0.2
 YFRAC(31)=0.225 ;YFRAC(32)=0.25
 YFRAC(33)=0.275 ;YFRAC(34)=0.3
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 10
 ZWLAST =0.5
 ZFRAC(1)=0.1 ;ZFRAC(2)=0.2
 ZFRAC(3)=0.3 ;ZFRAC(4)=0.4
 ZFRAC(5)=0.5 ;ZFRAC(6)=0.6
 ZFRAC(7)=0.7 ;ZFRAC(8)=0.8
 ZFRAC(9)=0.9 ;ZFRAC(10)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(5)=V1
 NAME(7)=W1 ;NAME(12)=KE
 NAME(13)=EP ;NAME(14)=H1
 NAME(146)=PRPS ;NAME(148)=ENUT
 NAME(149)=LTLS ;NAME(150)=WDIS
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(KE,Y,Y,N,N,N,N)
 SOLUTN(EP,Y,Y,N,N,N,N)
 SOLUTN(H1,Y,Y,N,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,N)
 SOLUTN(ENUT,Y,N,N,N,N,Y)
 SOLUTN(LTLS,Y,Y,Y,N,N,Y)
 SOLUTN(WDIS,Y,N,N,N,N,N)
 VIST = 148
 PRPS = 146
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(KE,N,Y,Y,Y,Y,N)
 TERMS(EP,N,Y,Y,Y,Y,N)
 TERMS(H1,N,Y,Y,Y,Y,Y)
 TERMS(LTLS,N,N,Y,N,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWENT = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 = GRND4
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 EL1A =0. ;EL1B =0. ;EL1C =0.
 ENUL =1.0E-05 ;ENUT = GRND3
 ENUTA =0. ;ENUTB =0. ;ENUTC =0.
 IENUTA = 3
 PRNDTL(V1)=1. ;PRNDTL(W1)=1.
 PRNDTL(KE)=1. ;PRNDTL(EP)=1.
 PRNDTL(H1)=1. ;PRNDTL(LTLS)=1.
 PRT(V1)=1. ;PRT(W1)=1.
 PRT(KE)=1. ;PRT(EP)=1.314
 PRT(H1)=1. ;PRT(LTLS)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-03 ;FIINIT(V1)=0.
 FIINIT(W1)=10. ;FIINIT(KE)=0.389857
 FIINIT(EP)=7.998817 ;FIINIT(H1)=300.
 FIINIT(PRPS)=-1. ;FIINIT(ENUT)=1.0E-10
 FIINIT(LTLS)=1.0E-10 ;FIINIT(WDIS)=0.05
 
 PATCH(BLOCKS ,INIVAL, 1, 1, 1, 4, 1, 10, 1, 1)
 INIT(BLOCKS ,PRPS,0. ,198. )
 
 PATCH(BLOCKN ,INIVAL, 1, 1, 31, 34, 1, 10, 1, 1)
 INIT(BLOCKN ,PRPS,0. ,198. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(KESOURCE,PHASEM, 0, 0, 0, 0, 0, 0, 1, 1)
 COVAL(KESOURCE,KE , GRND4 , GRND4 )
 COVAL(KESOURCE,EP , GRND4 , GRND4 )
 
 PATCH(INL ,LOW , 1, 1, 5, 30, 1, 1, 1, 1)
 COVAL(INL ,P1 , FIXFLU ,10. )
 COVAL(INL ,W1 ,0. ,10. )
 COVAL(INL ,KE ,0. ,0.389857 )
 COVAL(INL ,EP ,0. ,7.998817 )
 COVAL(INL ,H1 ,0. ,300. )
 
 PATCH(OUTL ,HIGH , 1, 1, 5, 30, 10, 10, 1, 1)
 COVAL(OUTL ,P1 ,1000. ,0. )
 
 PATCH(HEATNW ,NWALL , 1, 1, 30, 30, 1, 10, 1, 1)
 COVAL(HEATNW ,H1 , FIXFLU ,1. )
 
 PATCH(HEATSW ,SWALL , 1, 1, 5, 5, 1, 10, 1, 1)
 COVAL(HEATSW ,H1 , FIXFLU ,1. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 30 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(V1)=10
 LITER(W1)=10 ;LITER(KE)=20
 LITER(EP)=20 ;LITER(H1)=20
 LITER(LTLS)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(W1)=1.0E-03 ;ENDIT(KE)=1.0E-03
 ENDIT(EP)=1.0E-03 ;ENDIT(H1)=1.0E-03
 ENDIT(LTLS)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(V1,FALSDT,0.025)
 RELAX(W1,FALSDT,0.025)
 RELAX(KE,FALSDT,0.025)
 RELAX(EP,FALSDT,0.025)
 RELAX(H1,FALSDT,1.0E+09)
 RELAX(PRPS,LINRLX,1.)
 RELAX(ENUT,LINRLX,1.)
 RELAX(LTLS,FALSDT,1.0E+09)
 RELAX(WDIS,LINRLX,1.)
 KELIN = 1
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(KE)=1.0E+10 ;VARMIN(KE)=1.0E-10
 VARMAX(EP)=1.0E+10 ;VARMIN(EP)=1.0E-10
 VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 VARMAX(ENUT)=1.0E+10 ;VARMIN(ENUT)=-1.0E+10
 VARMAX(LTLS)=1.0E+10 ;VARMIN(LTLS)=-1.0E+10
 VARMAX(WDIS)=1.0E+10 ;VARMIN(WDIS)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 GENK = T
 YPLS = T
 PARSOL = F
 IENUTA = 3
 ISG62 = 1
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 SPEDAT(SET,MATERIAL,198,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(KE,Y,N,Y,Y,Y,Y)
 OUTPUT(EP,Y,N,Y,Y,Y,Y)
 OUTPUT(H1,Y,N,Y,Y,Y,Y)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 OUTPUT(ENUT,Y,N,Y,N,N,N)
 OUTPUT(LTLS,Y,N,Y,Y,Y,Y)
 OUTPUT(WDIS,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 30 ;IZMON = 5
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 30 ;NUMCLS = 5
 NYPRIN = 1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = 1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP